|CDX Constant Name:||kCDXProp_Spectrum_YType|
|CDX Constant Value:||0x0A83|
|Property of objects:||kCDXObj_Spectrum|
|First written/read in:||ChemDraw 5.0|
|Required?||Until ChemDraw 6.0|
The type of units the Y-axis represents.
This is an enumerated property. Acceptible values are shown in the following list:
|0||Unknown||The axis type is unknown. Not recommended|
|1||Absorbance||Axis is in absorbance units, and consequently has a baseline of 0.0 with peaks pointing up. Only for IR spectra|
|2||Transmittance||Axis is in transmittance units. The baseline is at 1.0 and peaks points down to a value of 0.0 being no transmission. Only for IR spectra|
|3||PercentTransmittance||Axis is in transmittance units*100. The baseline is at 100% and peaks points down to a value of 0.0 being no transmission. Only for IR spectra<|
|4||Other||Axis is some other type|
|5||ArbitraryUnits||Axis is unscaled -- essentially, the absolute values have no meaning and only relative values matter|
If this property is absent:
The Y-axis is treated as having Unknown units. This is not recommended.